Dynojet Power Commander V Secondary Fuel Module Yamaha R6 / R1 [Open Box]

Item Condition: This is a new item that is missing the original packaging or the packaging has been opened. Tags, manuals, or installation instructions may be missing, however the item is fully functional.

Dynojet Power Commander V Secondary Fuel Module Yamaha R6 / R1

The Power Commander V Secondary Fuel Module is for enthusiasts who have radically modified their motorcycle’s engine and need total control of all 8 fuel injectors. Most modern, high performance, four cylinder sportbikes have two fuel injectors per cylinder and the Power Commander V connects to 4 of those 8 injectors. The PCV SFM connects to the upper injector rail using OEM connectors, then once connected you are able to individually adjust all 8 upper and lower injectors by as much as +250/-100%.

If the gear position input is connected on your PCV it will enable the SFM to adjust all of the injectors on a per gear basis, as well as the ability to map each injector separately. This means you can load up your PCV with up to 48 complete maps!

The Dynojet Secondary Fuel Module also features a basic mode that allows you to have a single fuel table that inputs fuel changes in both upper and lower injector modules simultaneously. This makes it easy if you have a modified engine that requires more fuel than 4 injectors can provide, but does not need the complexity of mapping each cylinder and each gear separately.

Features:

• Allows for the adjustment of all eight injectors
• OEM style injector connectors
• Single cable connection to the PCV
• Adjust both upper and lower injectors by as much as +250/-100%
• Up to 48 complete maps
• Made in the USA